Wireless Condenser Controller

 

 

 

The Wireless Condenser Controller is a wireless connection between an air conditioning unit or heat pump condenser and a split system furnace or air handler where the furnace or air handler is inside the structure and the air conditioning condensing unit or heat pump condenser are outside the structure. The thermostat, which controls the air conditioning or heat pump unit is also inside the structure.

When a cooling signal from a thermostat goes out, the circuit board is energized and turns on the air conditioning or heat pump portion of the air conditioning unit, which is wired internally to the compressor so that cooling or heating in the structure occurs. The wireless circuit board eliminates the need for having the hard-wired communication between the furnace or air handler and the air conditioning condenser or the heat pump condenser.

 

 

 

PRODUCT FEATURES & BENEFITS

Special features

  • Controls heat pump and air conditioner condensers from inside
  • Wireless controls bypass chewed or broken wires
  • Alternate way to assure air conditioner will engage
  • Can be installed in current systems
  • Unique product – not available on the market
  • Works with existing 24v thermostat
  • Does not require new WiFi system to operate
  • Can be installed at factory
  • Other applications possible

 

 

PRODUCT DETAILS

The Wireless Condenser Controller is a wireless transmitter which will receive 24 v from the thermostat and send a wireless signal to the receiver at the condensing unit or heat pump and bring on the air conditioning condenser or a heat pump condenser for heating or cooling. This eliminates any wires from inside the house, wire breakdown or rodent problems. The board can be wired for heat pump applications.

 

The wireless circuit board includes the following features:

A. The board will have a minimum frequency range of 100 feet.

B. The board will not be more than 4” by 4” square so it can be easily installed in an existing or new condensing unit or a heat pump condensing unit.

C. The board will have an “on light” with a 3 to 5-amp fuse.

D. The board will come in two types:

(i) The control circuit will be 24 volts which will be wired into the unit 24-volt control circuit for straight cooling or heat pump applications on split systems for residential and commercial equipment.

(ii) The board can be used in residential and commercial applications where the unit is a split system and has a 24-volt control circuit for straight cooling or heat pump applications.

E. The control wireless circuit board can be used on all existing equipment when used with a new or existing 24-volt thermostat.

 

The equipment the Wireless Condenser Controller can be used for is: Heat pump condensing units; and Straight air conditioning condensing units.

A working prototype of the Wireless Condenser Controller can be made available to demonstrate the design and functionality of the product.

 

 

 

The Wireless Condenser Controller is covered by United States Utility Patent: 10,240,809

 

 

 

For additional information, licensing opportunities, and a full prospectus on the Wireless Condenser Controller  contact:

 

 

BankOnIP

VP of Business Development

Email: info@BankOnIP.com