Solar Electric Hybrid Backup Power System

 

 

 

 

The Solar Electric Hybrid Backup Power System combines Off-Grid and On-Grid based solar energy systems that store energy in batteries. A hybrid system means that the solar panel is still connected to the grid’s system and has a battery used to store excess power. The solar panels also absorb energy from the sun and use a converter to create electricity for your battery, home, or grid. With a Solar Electric Hybrid Backup Power System, you can be sure you will always have power in any situation.

These systems include a solar panel, 1 battery, charge controller, compatible hybrid inverter, and battery combinations that provide backup power for systems tied to grid power. It is imperative to use compatible software between the battery technology and inverter to meet safety compliance standards. 

Solar Electric Hybrid Backup Power System can use the solar system as a backup power source if the grid goes down or experiences a power shortage. Since not every battery and panel system provides backup power automatically, there has to be a special configuration. Solar Electric Hybrid Backup Power Systems are preferred because they utilize renewable sources in the best way, provide continuous power supply, are highly efficient, and have a low maintenance cost. 

 

 

 

 

 

 

PRODUCT FEATURES & BENEFITS

Special features

  • Can serve DC and AC loads
  • Hybrid systems come in various sizes to meet your power requirements
  • OEM hardware integration
  • Features solid-state electronics and FM, UL and CSA listed components
  • Ideal for locations with sunlight conditions or variable loads
  • Easy to install
  • Solar panel
  • Hybrid inverter which connects to the electrical panel
  • An auxiliary panel for critical loads and it’s also connected to the hybrid inverter
  • Battery bank

 

 

PRODUCT DETAILS

 

The Solar Electric Hybrid Backup Power System runs on solar power and mains power and is equipped with a battery backup for periods without sun or power outages. Excess power generated by the solar panel is stored in the battery to be used later during the event of a blackout, insufficient sunlight, or inclement weather. You don’t have to worry about using up all the power stored in your battery with a Solar Electric Hybrid Backup Power System since you can still draw power from the grid.

 

The Solar Electric Hybrid Backup Power System operates by sending energy from the sun to the hybrid converter, converting it to usable electricity before sending energy to power your home. The excess energy not used to power your home is safely directed to the battery bank for storage. If your solar panels are not producing energy, the power stored in your battery is used. You don’t have to worry about extra energy that remains after all these steps since it is sent back to the grid, enhancing the safety of your property.

 

The introduction of the Solar Electric Hybrid Backup Power System has led to many interesting innovations, with modern hybrid inverters allowing homeowners to take advantage of changes in the utility rates throughout the year. These systems utilize Lithium battery technology which allows for more power capacity than traditional battery backup units. Using the communication technology of a compatible hybrid inverter, the Solar Electric Hybrid Backup Power System is the best solution for those looking to add to their existing system. This will be extremely helpful as we transition towards the smart grid in the coming years.

It is important to choose equipment that works for your current and future energy needs as a homeowner. You can install the Solar Electric Hybrid Backup Power System with solar panels, inverters, and other pertinent equipment before adding the battery onto the system in the future.

 

Materials needed to produce the Solar Electric Hybrid Backup Power System

The Solar Electric Hybrid Backup Power System is the most economical and one-of-a-kind system, with an all-in-one hybrid inverter that contains a battery inverter and a solar inverter at the same time. Combined with smart controls and a Lithium battery, the Solar Electric Hybrid Backup Power System is the complete package. Materials needed to produce this product include:

  • New Powa 210 Watt Solar Panel
  • Dayton 12 Volt DC motor 4Z529 1/6 hp
  • Altenator Kabota 12 Volt, 40 Amp
  • Aims 500 Watt Inverter
  • Renogy 300 ah Battery
  • Copper Buss Bars x 2
  • Solar Charge Controller
  • 12 Volt DC Fuse Block
  • Coupled diesel systems
  • Programmable Voltage sensing relay
  • Mounting brackets or safe enclosure
  • Wire
  • Connectors
  • Hardware

 

 

 

 

The Solar Electric Hybrid Backup Power System is covered by United States Utility Patent: 10,951,058

 

 

For additional information, licensing opportunities, and a full prospectus on the Solar Electric Hybrid Backup Power System  contact:

 

 

BankOnIP

VP of Business Development

Email: info@BankOnIP.com